Why We Built This
We built this heater for one reason: to solve a real problem on a real job site. It’s a halogen lamp that throws out serious radiant heat, fast. When you need warmth in a hurry and don’t have time to mess around, this thing gets the job done.
What Makes It Tick
Here’s the thing—this heater was designed around the way work sites actually work. It runs on 400V, so you can plug it straight into the standard site power. No extra transformers. No hunting for adapters. Just wire it in and go. The tube is only 300mm long, which means it squeezes into tight spots. Above a doorway. Next to a workbench. Under a temporary cover. It gets out of the way so you can get on with your work. And at 2500W, it punches above its weight. You feel the heat almost instantly. It’s the kind of warmth that cuts through the cold and makes the space feel liveable again.
Built to Take a Beating
Halogen technology keeps the heat steady. The gas inside the lamp helps the filament stay stable, so you get consistent warmth from start to finish. The quartz tube handles the shock of being switched on and off again and again. It laughs in the face of wind and moisture. And swapping out the lamp is dead simple. The R7s connector is a standard you already know. No special tools. Just drop it in and get back to work.
Where It Shines (And a Quick Reality Check)
On the site, this heater is your go-to for spot heating, keeping critical lines from freezing, and drying out wet materials. It’s quick to install and just keeps running. But let’s be honest—2500W is serious power. That means you need to make sure the circuit can handle it, and give it enough airflow. It’s not meant to run in a sealed box. Give it some breathing room, and it’ll keep you warm all day.